How to Charge Canon Camera Battery Without a Charger
Guides

How to Charge Canon Camera Battery Without a Charger

How to Charge Canon Camera Battery Without a Charger

How to Charge Canon Camera Battery Without a Charger – 3 Different Methods

Either it’s a family BBQ gathering or it’s a business trip that requires to be photographed, at some point, you’ll likely use your camera.

And what the worst thing that can happen? What if the camera’s battery dead? Or if your camera not working properly? Well, all of these issues are no less a hassle. We have seen people often searching about how to charge a canon camera battery without a charger, which brings us here to write this article.

If you came across a situation where your camera’s battery low so you won’t be able to capture photos and might miss the precious moments of your life.

But don’t you worry anymore because with us you have got that covered. In general, the cannon’s camera batteries are easily accessible in the market and online too. The main objective of the camera battery is to provide power to use the camera.

Read Also: 12 BEST GIMBALS FOR CANON G7X MARK II IN 2021 – REVIEWED

Extra batteries are always helpful as a backup plan. To date, there are many different kinds of batteries available in the market that functions differently. There is some unauthorized canon camera dealer in the market who offers low-quality batteries.

You must avoid these kinds of replacement batteries as they have lower battery capacity than what they advertise or offer. So it is advised to buy the best quality that suits your camera model from the cannon official store.

How to Charge Canon Camera Battery Without a Charger

Here are 3 methods by which you can charge your canon camera battery without a charger. Here are they:

  • Charge by a wall plug
  • Charge via power bank
  • Charge via computer

These are the general methods, but the catch is that not all the methods will work for you. It depends on the type and model of your camera. If you are using a camera that is so old maybe none of this method will work.

Note: The basic requirement for these methods to work is that you have a USB port. Some of the old cameras don’t come with a USB port, so before you try any of these methods ensure that your camera has a USB port.

Method 1: Charge Canon camera battery via wall plug

You can easily charge your cannon camera via a wall plug without a battery charger. If your camera doesn’t come with a power cord or USB cord but has a USB port, then the first thing you need to do is to buy a USB cable. Make sure you buy the right cord that is compatible with your camera port.

The replacement cable you can use is USB 3.0 (fast charging,3.1 A) or USB 2.0 Type-A to Mini B.

Here is the procedure:

  • First, put the battery in your camera.
  • Make sure the camera is turned off. If the camera is on while connecting the battery may not charge.
  • Now it’s time to connect your USB cable to your camera. The connecting port will be located inside the rubber cover that hides the ports and connection of the camera.
  • Now, connect your USB cable to the wall plug via a plug adapter and plug it into the wall.
  • The light will glow when the camera is charging and it’ll be turned off when the battery is full.
  • Your camera will be approximately charged in 3 hours.

Note: Never chargeyour camerafor more than 24 hours because it can degrade the battery life of your camera.

Method 2: charging a cannon camera battery with a power bank

This method is simpler and handy if you have a power bank. With this method, you don’t have to head towards the wall plug. You can even charge your camera’s battery while you are traveling. Here is how you can do it:

  • To charge your camera or DSLR via a power bank you need to have a USB Type-C power delivery feature.
  • After you get a power bank, make sure the power bank has enough capacity to charge the battery of the camera.
  • Here is how you can determine the power capacity of your camera.
  • Take your rechargeable batteries out of your camera.
  • The rechargeable batteries come with the specs written on them. Find it there that how much Mill amperes (mAh) battery has. This will let you know that how much capacity the battery has.

For instance: the cannon battery requires 1,400 mAh of power, so if you buy a power bank that has a capacity of 30,000 mAh, then you can easily charge your camera’s battery.

Even a lower capacity camera like 10,000mAh can charge the battery up to 10 times with a single charge.

To charge cannon camera via power bank you’ll need

  • Put the camera battery in your camera.
  • Make sure the camera is turned off. If the camera is on while connecting the battery may not charge.
  • Now, open the rubber cover that hides the port and cord connections, then connect the power cord that came with the camera and build up the connection.
  • Now, connect the other end of the cable to the power bank.
  • You’ll be notified at the top side of your LCD at the battery icon when the camera starts to charge.
  • Also, you’ll get to see the light glowing on the lower side of your camera. If the battery is low it’ll display the red color, when the camera is charging it’ll display the green color.

Charging via a power bank will take a couple of hours to charge. When the green light goes off it means that your camera is fully charged and the battery icon at the top of the camera will be displayed fully charged.

If you are facing any kind of trouble when charging your camera via power bank then again check the power requirement of your camera.

A word from cannon: Cannon company on this method No 2 says that this isn’t a good solution. But no need to worry because there are a lot of users who are doing it without any problem.

But to be safe we’d advise you to know the specs of your camera and the risks involved in this method before you try this method.

Method 3: Charging camera battery via computer

If you have a computer and need to charge your cannon camera without a charger, then you can do it easily via computer.

It’s important to make sure that you change your camera, in the same way, we as prescribed because some of the cameras come with a larger power draw like a mirrorless camera or DSLR camera.

This method will not work for these types of cameras. If you have point and shoot camera from the cannon lineup this method might work for you. For confirmation check the manual that comes with your camera.

Here is how to charge a cannon battery without using a charger

  • Put the camera battery in your camera.
  • Makes sure you have placed a memory card in the camera, or else some camera will not charge if the memory card is not placed.
  • Make sure the camera is turned off. If the camera is on while connecting the battery may not charge.
  • Now, open the rubber cover that hides the port and cord connections, then connect the power cord that came with the camera and build up the connection.
  • Now plug the cord into a USB port of your computer and connect the other end to the cannon camera.
  • You’ll be notified at the top side of your LCD at the battery icon when the camera starts to charge.
  • Also, you’ll get to see the light glowing on the lower side of your camera. If the battery is low it’ll display the red color, when the camera is charging it’ll display the green color.

A word from cannon: Cannon company on this method No 3 says that this isn’t a good solution. But no need to worry because there are a lot of users who are doing it without any problem. But to be safe we’d advise you to know the specs of your camera and the risks involved before you try this method.

Why you need a cannon original charger to charge mirrorless or DSLR camera

Here are the several reasons for that:

  • Camera type like mirrorless or DSLR camera comes with a larger power draw that a USB connection won’t be able to cut it.
  • The voltage shared via a USB cable will be low in power so it would take approximately 8 hours to charge the whole battery.
  • Your camera might not come with a USB port.
  • Not all camera from cannon lineup comes with the built-in camera charger or transformer installed in it.
  • If you have added a grip holder for the battery that is attached to the bottom side of your camera which has a charger installed in it. Ensure to only use the cannon USB adaptor to charge the cannon camera.

Wrapping up

So in this article, we have let you know how to charge a cannon camera battery without a charger. We hope this article will helpful to you.

Thank you

About the author

awaisgul

It's me AG software engineer. A pro lover of Technology and tech gadget. Love to Write about tech gadgets and news of upcoming things related to technology.

Leave a Comment