No wonder, after publication, the Canon M50 secured a considerable market share and is only keeping up the power of the excellent little camera as months go by.
Although many vloggers are upgrading from their canon G7X or Sony RX100 to Canon M50, and because it’s a significant bit of kit, many people have found out what is the best Gimbal for Canon m50.
Now the Canon M50 has been in a grey zone because it is just over one pound body weight. In contrast to our other GIC recommendations, we can slightly cut and direct hop in for any advice on the camera’s body.
Read Also: 10 BEST GIMBALS FOR NIKON D850– REVIEWED
This means you can still transfer the camera to a jacket mostly built for a dot-and-shoot camera like the Zhiyun Crane M2 or the Feiyu Tech g6 as it is a mirrorless camera.
Now you must remember that while saving you a small amount of cash on your Gimbal, it really limits lenses and other components, as this leaves just only half a pound of payload weight to be mounted on your m50.
This makes us recommend that you always choose one of the mirrorless gimbals in the following comparison table to ensure that you can use whatever attachments you like on your m50, even if the sensor is on the lower end of the weight mirrorless camera.
Table of Contents
Ten Best Gimbals for Canon m50
If you’re one of our frequent readers, it’s likely no surprise that Zhiyun Crane Plus is one of the best gimbals on the market today as our suggested Gimbal on Canon m50 cameras.
In the light of the reputation of the Gimbal, it seems that many other people agree with us too, as the reputation of the Gimbal is excellent.
In our opinion, Zhiyun’s experience with his other goods over the years has been tremendous, and he’s put it all into the Crane Plus so that he has everything a mirrorless camera owner would like.
It has excellent efficiency, excellent load power, strong battery life, professional construction quality, and a relatively low price tag for anything you get for your money.
This article will discuss the Crane Plus; we have an in-depth review of the Zhiyun Crane Plus, which we’ve recently published, which can be helpful.
As the new Crane Plus has been produced, Zhiyun has been setting itself the target of overcoming the already out-of-the-box v2 by Crane Plus for several years, the leading position on the mirrorless camera market.
Like you expect of a brand such as Zhiyun, which insists that they innovate in the next generation, they delivered and blew the v2 from the water.
In v2, the battery life of the crane Plus was extended from 8 – 12 hours to 12-18 hours, and the time it would take to load from emptiness to completeness was shortened to just 3 hours! The overall loading power of the Crane plus was 5.5.
Furthermore, when all the changes are made, the price tag for the Crane Plus is about 10% lower than the v2. In our view, the design of the Crane Plus was, as we stated earlier in the article, perfect and perfectly functional.
Recently, two new launches by a rival brand have been launched with some design issues and left us very concerned, but, luckily, Zhiyun did not drop the ball and released a perfect kit.
Since the previous Crane Gimbals were very common both in the travel vlogger community and in the videography community, working in niches to make the Crane Plus as sturdy as possible for the entire Zhiyun movement.
They were happy to deliver, and this Gimbal will take more than his fair share of a penalty and come out from the other side and provide you with good picture stability for your m50.
If you expect to fly many of your bags, this is a massive advantage for you, making you more comfortable because the bug is strong enough to take the trucks it will carry on without cracking.
The next on our list, the DJI Ronin SC, which has only been available for a few weeks when writing, is the latest child in the block for gimbal stabilizers for a mirrorless camera weight class.
Ronin SC’s big brother, Ronin S, is now a long-standing company and is one of the most robust kits on the market for heavier DSLR setups.
DJI decided to see a solid competitor on the market for cameras without a mirror, and that’s how the Ronin SC came about.
This being said, while we believe DJI has done a fine job when it comes to the Ronin SC and that it may fit nicely into your Canon m5, we cannot see why, relative to the above-covered Zhiyun Crane Plus, you want to spend more money on lower payload and less battery life.
Since this isn’t our most recommended knockout for your Canon m50, we’ll be burning it to try to save time for our readers while still having the key points for the Ronin SC.
All this, however, will make the DJI Ronin SC a perfect partner for your Canon m50 if you want to stick with the DJI brand, as seen in the video above.
The clip was shot with an m50 and Ronin SC and showed precisely what you can catch with pay and indicates what the new handheld DJI can do.
The following product we will be placing on our Canon m50 list of cups is the Feiyutech AK2000, and, in all fairness, we suggest taking one of the two other cups in the AK2000 post.
While Feiyutech has strong gimbals available on the market, we believe that their latest AK line is too difficult for us to recommend it primarily or secondarily.
To be frank, if the Gimbal had not managed, when a few Canon m50 owners were using it as their preference, to gain a good name for himself, we would not have featured the AK2000.
You should read our Feiyutech AK2000 analysis, which we will examine in more depth if you want to know more about the Gimbal’s problems.
The short version is spontaneous movements that happen during use, 20-30% of the AK2000 and AK4000 gimbals. There is also a problem with it as you move slowly to your left in timelapse mode, and finally, the grip pad slips up and reaches the gimbal control pad allowing the incline mechanism to kick in randomly.
The Zhiyun line, in our view, provides a variety of items that are all deemed to be the best fitting for Canon m50 Cameras, according to your camera platform (Click here to check for product prices and availability).
While some of our readers may think that Zhiyun Gimbals have the highest price tag, it also has the most versatility and the best results. This has led to the community’s great popularity and the prestige it holds today. This is the most significant thing.
As a result, several video makers have opted for post-independent Zhiyun Crane 2 reviews (click here to read some). If you have time, we strongly advise you to read any of them for a third-party view.
The Zhiyun Crane 2 gives you a battery life of around twelve hours, but the closer you come to the upper load cap, then the more battery your camera platform would need.
The Gimbal also uses the exact fast release plate mechanism as the Manfrotto tripod range so that you can move quickly between the Gimbal and a tripod as required.
Zhiyun Crane 2 also provides the most excellent stability of the images from all Zhiyun Gimbals, as seen in the pictures shown above, taken from a Canon m50 mounted on a Zhiyun Crane 2.
Although the Zhiyun Crane V2 has a somewhat similar name (note that before 2), it is, in fact, an older variant of the Zhiyun Crane 2, which we discussed above.
Click here to search product pricing and disponibility. While some people prefer to underestimate the Zhiyun Crane V2 due to its older hardware, it can make the Canon m50 the perfect Gimbal, and we believe it should be taken seriously.
Yes, its efficiency is a bit lower than the above Zhiyun Crane 2; but the older Zhiyun Crane V2 technology makes it at a lower price when providing all the features from a Gimbal.
It offers a lifetime of about 12 hours and a payload of about four pounds. If you just want to connect your Canon m50 and your preferred lens to the Gimbal, so it’s definitely the best thing for you.
While there are some more modern gymnastics available on the market, the Zhiyun Crane V2 is still popular today and is reviewed by independent videographers. If you want to read all of them, you should click here, and we strongly suggest you do so.
The clip below was also photographed with a Canon m50 fixed on a Zhiyun crane V2, which, as you can see, is ideal for stabilizing the Canon m50.
The next Gimbal we are mentioned in this article is the Zhiyun Crane-M. We think this is a poor option for your Canon m50, and one of the two gimbals discussed above will fit better; some people are continuing to suggest the Zhiyun Crane-M, so we decided to protect it.
Now don’t get us wrong. Zhiyun Crane-M, in our view, is a tremendous little gimbal machine. The cost can be the same, but it does not exceed the above-covered Zhiyun Crane V2, depending on where you buy it.
Now technically speaking, you can only be in the Zhiyun Crane-M payload range if you just intend to use a package lens (0.29 pounds) that contains any of Canon m50 packages.
This may be the best for you, but we just believe you can use the Zhiyun Crane V2 (click here to look for product pricing and availability).
However, you know your own individual situation and the accessories you intend to use for your Canon m50 only, as we stated at the start of the article.
We hope that our article has enabled one of our followers, who own Canon m50, to emphasize the benefits of each of these three gimbals.
The next one is on our list is Feiyu G6 Plus Canon m50. It is one of the highest performing and great building efficiency gimbal for Canon EOS M50 while maintaining the top place in the vlogging scene.
G6 Plus has a maximum capacity of 1,76 lbs, which seamlessly helps your Canon M50. 12-hour battery life can be anticipated, which by the way, only takes 3-4 hours to completely regenerate. Now it’s super comfortable.
Both G6 Plus’ software and hardware work together to create the best image stabilization. As the Crane V2 above mentioned, you can use your thumb to activate all the essential gimbal functions.
The control mechanism is simple and straightforward to manage. All right, let’s talk about construction efficiency and architecture now.
The G6 Plus Gimbal is an absolute animal that is just 1.46 lbs in weight. I can only commend Feiyu for the lightweight design of all the features that the gimbals provide.
And most importantly, you still don’t compromise the style. It allows you to carry the bucket without hassle for more extended periods.
I would not neglect the fact that some of Feiyu’s earlier generations have problems with their construction standards. But the G6 Plus Gimbal Stabilizer is no longer the case.
It comes from the new Feiyu G range, which means that it has been made with high-quality materials and updates with firmware.
The next one is Zhiyun-Tech WEEBILL-S Gimbal for Canon m50, and this Stabilizer has a rear handle for smoother shootings movement in a more lightweight build than the weebill laboratory.
Zhiyun-Tech has also enhanced the torque and response of Gimbal to help match heavy DSLR cameras with fixed lenses.
Six operating modes are available at the WEEBILL-S. Complete POV mode is available to move spin, pan, and tilt. It is possible to move the axis to 360 degrees.
Extreme gamers love Go Mode and hyper-lapse images in PF mode. Go Mode. The F Mode imitates the gimbal handle’s rotation while the L Mode lugs your subject while you fire from a dolly.
Lastly, the Vortex mode offers a barrel view of 360 degrees shoots. If not in use, inside the storage container, you should put the Zhiyun-Tech WEEBILL-S stabilizer.
However, before you hold the Gimbal out, you can remove the included release plate. There is also a mini tripod that acts either as a stand or as a handle nearby when you film scenes.
Finally, there is an OLED show of Zhiyun-Tech WEEBILL-S, which lies above your Gimbal status. It can show configurations like drive strength and smoothness, to name a few.
The Zhiyun-Tech WEEBILL-S with Follow Focus Pro Gimbal Stabiliser is available for you when looking for a lightweight setup finished during scenes involving movement. So, this the Gimbal for the ZV1 camera.
The MOZA Air 2 is another model of Moza in this series. At 3.53 pounds, it is heavier than Moza AirCross 2 (1.6 kilograms).
This model can accommodate different cameras that weigh up to 4,2 kg (9 pounds) without a mirror, DSLR, and pocket cameras. Its high-torque FOC technology engine gives you the balance needed for a workout.
This is the best Gimbal for ZV1, and its features are suitable for the ZV1 camera. The same engine is less than the Gimbal itself, but no other viewfinder is blocked when you fire.
The auto-tuning method detects the heaviness of your camera to help drive. The replaceable Li-ion 18650 batteries last up to 16 hours, but the four-axis on the Air 2 is much more remarkable.
This one has the fourth dimension, iFocus, except the regular three axes. You can monitor focusing and zooming with this new addition. The eight modes that follow allow you to monitor your subject in its entirety.
The foundation is removable and can be attached to the grip. It would help if you took this as an extra handgrip when you don’t need the tripod frame to support it in both hands.
The handle has an OLED pad, joystick, ISO, recording button, aperture, and shutter speed on the right and left-hand side. The Roto wheel on the side can be adjusted to perform several different functions, including focus adjustment.
You will charge these gips if you have the correct converter. The handle also has one VDC input and 3 VDC outputs. The front finger trigger puts the camera back in the middle.
This Gimbal is one of the best on the market with its simple-to-use quick-release plate. It is best for the canon m50 camera and very easy to use with unique functions.
The last one is on our list is Ikan beholder DS2, and it is very good with so many functions. If the industry is to be judged, fabricators believe in offering professionals superb products. In DS2, therefore, you have been served to complete professional filmmaking tasks.
The DS2 is one of the best kits for your Nikon D750 to buy if you want to give your project a professional touch. The camera is one of the lightest on the market, but a camera can be lifted in 5 pounds or approximately 2.5 kg.
The Beholder DS2 comes with an Auto-Sweep mode (60 seconds), allowing for a full minute movement programming. Also, this Gimbal’s mobile functionality is smooth enough to allow rapid modifications.
Furthermore, regardless of the time or setting, the camera can be moved to Inverted Mode, and all you need to do is turn a gimbal handle onto the camera to get aiming.
Ikan Beholder DS2 will keep you single-handedly, but without distraction or time-wasting on the gimbal environment, it is possible to save beautiful moments. You should, however, get up to 10 hours of battery life. This Gimbal is best for Canon m50.
- 24.1 CMOS Sensor MP APS-C scale
- Just link and wirelessly exchange or backup
- Fast, precise AF and accurate tracking
- Shoot at 10fps constantly
- Shoot outstanding 4K videos
- EOS-like handling and a giant electronic viewfinder with responsive
- Strong DIGIC procedure
The Canon EOS M50 is one of Canon’s best-selling mirrorless APS-C cameras. Canon EOS M50 is packed with a high definition, UHD 4K video capture and an enhanced CMOS AF Dual-Pixel Eye Detection AF.
Canon EOS M50 is famous for vloggers and filmmakers thanks to its fantastic video features. To improve your video quality, we’ve checked and tested the new gimbals, and you’d better have a Gimbal stabilizer for Canon EOS M50.
We believe that it is the right compañero for the Canon m50 because it will provide you with all the image stabilization you will ever require and provide you with all the payload you desire.
We do not question that Gimbal can help you boost your profile and make your customers happier or make the best possible images for your YouTube channel.
In our view, it is a straightforward option for a camera like m50 and is an excellent addition to your camera accessory range.
This takes us to the conclusion of our Canon m50 camera report on the best gimbals, and we very much hope you have considered our paper worthwhile.
When we get into the post, we have tried to find both positive and negative points about each Gimbal. We expect you to have a greater understanding of the device you want to apply to your camera accessories.